Filter
Top Products
126 System Maintenance
2. Ping Host - This diagnostic test pings the host which
determines the functionality of the TCP/IP protocol on your
system.
3. Reboot System - This option reboots the system. This serves to
implement any changes that may have been recently added to
your system.
4. Command Mode - This option allows the user to enter the
command mode. This mode allows you to diagnose and test
your Prestige using a specified set of commands.
Backup Configuration
Selecting option 5 from Menu 24 - Maintenance will allow you to
backup your current Prestige configuration onto disk. Backup is
highly recommended once your Prestige configuration is
functioning.
You need to download the configuration onto disk. Procedure for
downloading varies depending on the type of software used to
access the Prestige but you must use the XMODEM protocol to
perform the download.
Restore Configuration
Selecting option 6 from Menu 24 - Maintenance will restore
backup configuration from disk to the Prestige. You need to upload
a backup file to the Prestige. Procedure for uploading varies
depending on the type of software used to access the Prestige but
you must use the XMODEM protocol to restore the configuration.
Keep in mind that configuration is stored on flash ROM in the
Prestige so even if power failure were to occur, your configuration
is safe.