Filter
Top Products
ZyAIR B-3000 User’s Guide
103 Chapter 10 Maintenance
Figure 57 Channel Usage
The following table describes the labels in this screen.
Table 33 Channel Usage
LABEL DESCRIPTION
SSID This is the Service Set IDentification name of the AP in an Infrastructure
wireless network or wireless station in an Ad-Hoc wireless network. For our
purposes, we define an Infrastructure network as a wireless network that uses
an AP and an Ad-Hoc network (also known as Independent Basic Service Set
(IBSS)) as one that doesn’t. See the Wireless LAN appendix for more
information on basic service sets (BSS) and extended service sets (ESS).
MAC Address This field displays the MAC address of the AP in an Infrastructure wireless
network. It is randomly generated (so ignore it) in an Ad-Hoc wireless network.
Channel This is the index number of the channel currently used by the associated AP in
an Infrastructure wireless network or wireless station in an Ad-Hoc wireless
network.
Signal This field displays the strength of the AP’s signal. If you must choose a channel
that’s currently in use, choose one with low signal strength for minimum
interference.
Network Mode “Network mode” in this screen refers to your wireless LAN infrastructure (refer
to the Wireless LAN chapter) and WEP setup.
Network modes are: Infrastructure (same as an extended service set ESS)),
Infrastructure with WEP (WEP encryption is enabled), Ad-Hoc (same as an
independent basic service set IBSS)), or Ad-Hoc with WEP.
Refresh Click Refresh to reload the screen.