Filter
Top Products
ZyAIR B-3000 User’s Guide
89 Chapter 7 Multiple ESS and VLAN
7.1.5.1 Edit ESS
Note: You must configure at least one ESS ID to activate multiple ESS on the ZyAIR
Click Edit in the Wireless screen.
Figure 45 Wireless : Edit ESS
The following table describes the labels in this screen.
Second Rx VLAN ID This field displays the identification number of incoming Ethernet frames that
are forwarded to this ESS. This number can be the same for many ESS
groups, depending on how many you want to be members of a particular
VLAN.
Edit Select the radio button next to the ESS index you want to configure and click
Edit to go to the EDIT ESS screen.
Delete Select the radio button next to the ESS index you want to remove and click
Delete to remove the ESS.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
Table 22 Wireless: Multiple ESS
LABEL DESCRIPTION
Table 23 Wireless: Edit ESS
LABEL DESCRIPTION
Name(SSID) Enter a descriptive name (up to 32 alphanumeric characters) for identification
purposes. This name is case sensitive.
Active Select this check box to activate this ESS.
VLAN ID Enter a number from 1 to 4094.
Second Rx VLAN ID Enter a number from 1 to 4094, but different to the VLAN ID entered.
ASCII Select this option to enter ASCII characters as the WEP keys.