Filter
Top Products
ZyAIR B-3000 User’s Guide
Chapter 19 System Maintenance and Information 158
Figure 113
B-3000> cnm
active sgid managerIp debug
reset encrykey encrymode keepalive
version
B-3000>
CNM CL
The following table describes the commands in this screen. All commands begin with “cnm”
so for example, type “cnm active 1” to enable Vantage CNM on your device.
Table 56 CNM Commands
COMMAND SUB COMMAND DESCRIPTION
active <0:Disable
1:Enable CNM via WAN
2:Enable CNM via WAN
or LAN>
0
1
2
This displays the ZyXEL device connection status with
Vantage CNM and displays the last date and time that the
ZyXEL device registered with the Vantage CNM server.
If Vantage CNM is disabled on the ZyXEL device, active
0 is displayed.
If Vantage CNM is enabled on the ZyXEL device using a
WAN connection, active 1 is displayed.
If Vantage CNM is enabled on the ZyXEL device using a
WAN or LAN connection, active 2 is displayed.
Use this command to disable Vantage CNM on your
ZyXEL device.
Use this command to enable Vantage CNM on your
ZyXEL device using a WAN connection.
Use this command to enable Vantage CNM on your
ZyXEL device using a WAN or LAN connection.
Last Register Time: 0-0-0
0:0:0
For example if Last Register Time 2004-11-20 10:34:23 is
displayed then the last date the device registered with
Vantage CNM was the 20th November 2003 at 10:34 PM.
The last register time displays the last date (year-month-
date) and time (hours : minutes : seconds) that the ZyXEL
device registered with Vantage CNM. It displays all
zeroes if it has not yet registered with the Vantage CNM
server.
sgid This command displays your ZyXEL device’s unique ID in
Vantage CNM.