Filter
Top Products
ZyAIR B-3000 User’s Guide
Chapter 19 System Maintenance and Information 160
19.1.3 Configuration Example
This is an example allowing Vantage CNM server (on the same subnet as your ZyXEL device)
with an IP address of 10.1.1.1, to manage your device. The device and Vantage CNM
communicate using DES encryption and a password of “12345678”.
encrymode
<0:NONE
1:DES
2:3DES>
This command is used to encrypt communications
between the ZyXEL device and the Vantage CNM server.
Use this command to set the encryption mode.
Type 0 to have no encryption, type 1 to have the ZyXEL
device use DES encryption or type 2 to have the ZyXEL
device use 3DES encryption.
The ZyXEL device must use the same encryption mode
as the Vantage CNM server.
keepalive
0
[seconds]
Keepalive messages are sent to the Vantage CNM server
by the ZyXEL device. They show the connection status
between the ZyXEL device and the Vantage CNM server.
This command displays the time interval in seconds
between the keepalive messages that the ZyXEL device
sends to the Vantage CNM server.
Use this command to disable keepalive message
sending.
To set a time interval type the cnm keepalive command
followed by a number from 10 to 655.
version This displays the Vantage CNM version.
Table 56 CNM Commands
COMMAND SUB COMMAND DESCRIPTION