Filter
Top Products
ZyAIR B-3000 User’s Guide
Chapter 6 Wireless LAN 64
6.3.4 AP+Bridge Mode
Click the WIRELESS link under ADVANCED. Select AP+Bridge in the Operating Mode
drop-down list box to display the screen as shown next. In this screen, you can configure the
ZyAIR to function as an AP and bridge simultaneously. See the section on ZyAIR applications
for more information.
Enable Spanning Tree
Protocol (STP)
Select the check box to activate STP on the ZyAIR.(R)STP detects and breaks
network loops and provides backup links between switches, bridges or routers.
It allows a bridge to interact with other (R)STP -compliant bridges in your
network to ensure that only one path exists between any two stations on the
network. Select the check box to activate STP on the ZyAIR.
Output Power Set the output power of the ZyAIR in this field. If there is a high density of APs
within an area, decrease the output power of the ZyAIR to reduce interference
with other APs.
The options are 17dBm (50mW), 15dBm (32mW), 13dBm (20mW) or 11dBm
(12.6mW).
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
Table 12 Wireless: Bridge/Repeater
LABEL DESCRIPTION