Filter
Top Products
ZyAIR B-3000 User’s Guide
Chapter 6 Wireless LAN 80
Figure 39 Wireless LAN: 802.1x/WPA for WPA Protocol
The following table describes the labels not previously discussed
Table 18 Wireless LAN: 802.1x/WPA for WPA Protocol
LABEL DESCRIPTIONS
Key Management
Protocol
Choose WPA in this field.
WPA Mixed Mode The ZyAIR can operate in WPA Mixed Mode, which supports both clients running
WPA and clients running dynamic WEP key exchange with 802.1x in the same Wi-
Fi network.
Select Enable to activate WPA mixed mode. Otherwise, select Disable.
WPA Group Key
Update Timer
The WPA Group Key Update Timer is the rate at which the AP (if using WPA-
PSK key management) or RADIUS server (if using WPA key management) sends
a new group key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the WPA Group Key Update Timer is also supported in
WPA-PSK mode. The ZyAIR default is 1800 seconds (30 minutes).
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.
Refer to table 17 for information on the additional fields shown in this screen.
6.9.3 Authentication Required: WPA-PSK
Select Authentication Required in the Wireless Port Control field and WPA-PSK in the
Key Management Protocol field to display the next screen.