Filter
Top Products
Table 1 Front Panel LED Description
LED COLOR STATUS DESCRIPTION
BRI/RPT Green On The wireless card on the ZyAIR is working properly.
Off The wireless card on the ZyAIR is not ready or has a
malfunction.
Red On The ZyAIR is not ready or rebooting.
ZyAIR(WLAN
ACK)
Blue Breathing The ZyAIR is sending or receiving data.
On (dim) The ZyAIR is ready, but is not sending or receiving data.
ETHN Green On The ZyAIR has a successful 10Mb Ethernet connection.
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have 10Mb Ethernet connection.
Orange On The ZyAIR has a successful 100Mb Ethernet connection.
Blinking The ZyAIR is sending or receiving data.
Off The ZyAIR does not have 100Mb Ethernet connection.
PWR Green On The ZyAIR is receiving power.
Off The ZyAIR is not receiving power.
ZyAIR B-3000 User’s Guide
37 Chapter 2 Hardware Installation and Initial Setup
2.2 Top Panel and Connections of the ZyAIR
The following figure shows the top panel of your ZyAIR.
Figure 10 ZyAIR Top Panel
2.2.1 One 10/100M Ethernet Port
Ethernet 10Base-T/100Base-T networks use Shielded Twisted Pair (STP) cable with RJ-45
connectors that look like a bigger telephone plug with 8 pins. The ETHERNET port is auto-
sensing, so you may use the crossover cable provided or a straight-through Ethernet cable to
connect your ZyAIR to a computer/external hub.
Note: When the ZyAIR is turned on and properly connected to a computer or a hub,
the ETHN LED on the front panel turns on.