Filter
Top Products
ZyAIR B-3000 User’s Guide
149 Chapter 18 Firmware and Configuration File Maintenance
1 Display menu 24.5 and enter “y” at the following screen.
Figure 98 System Maintenance: Backup Configuration
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
2 The following screen indicates that the Xmodem download has started.
Figure 99 System Maintenance: Starting Xmodem Download Screen
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 100 Backup Configuration Example
Type a location
for storing the
configuration file
or click Browse
to look for one.
Choose the
Xmodem protocol.
Then click Receive.
4 After a successful backup you will see the following screen. Press any key to return to the
SMT menu.
Figure 101 Successful Backup Confirmation Screen
** Backup Configuration completed. OK.
### Hit any key to continue.###
18.3 Restore Configuration
Menu 24.6 –- System Maintenance – Restore Configuration allows you to restore the
configuration via FTP or TFTP to your ZyAIR. The preferred method is FTP. Note that this
function erases the current configuration before restoring the previous backup configuration;
please do not attempt to restore unless you have a backup configuration stored on disk. To
restore configuration using FTP or TFTP is the same as uploading the configuration file,
please refer to the following sections on FTP and TFTP file transfer for more details. The
ZyAIR restarts automatically after the file transfer is complete.