Filter
Top Products
ZyAIR B-3000 User’s Guide
Chapter 4 Wizard Setup 48
Once you have decided on the network number, pick an IP address that is easy to remember,
for instance, 192.168.1.2, for your ZyAIR, but make sure that no other device on your network
is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your ZyAIR will
compute the subnet mask automatically based on the IP address that you entered. You don't
need to change the subnet mask computed by the ZyAIR unless you are instructed to do
otherwise.
Figure 15 Wizard 3 : IP Address Assignment
The following table describes the labels in this screen.
Table 6 Wizard 3 : IP Address Assignment
LABEL DESCRIPTION
IP Address Assignment
Get automatically from
DHCP
Select this option if your ZyAIR is using a dynamically assigned IP address
from a DHCP server each time.
Note: You must know the IP address assigned to the ZyAIR (by
the DHCP server) to access the ZyAIR again.
Use fixed IP address Select this option if your ZyAIR is using a static IP address. When you select
this option, fill in the fields below.
IP Address Enter the IP address of your ZyAIR in dotted decimal notation.
Note: If you changed the ZyAIR's IP address, you must use the
new IP address if you want to access the web configurator
again.
IP Subnet Mask Type the subnet mask.
Gateway IP Address Type the IP address of the gateway. The gateway is an immediate neighbour
of your ZyAIR that will forward the packet to the destination. The gateway
must be a router on the same segment as your ZyAIR's LAN or WAN port.
Back Click Back to return to the previous screen.
Finish Click Finish to proceed to complete the Wizard setup.