Filter
Top Products
Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
234
egress set <port-list> Sets the outgoing traffic port list for a
port-based VLAN.
13
exit Exits from the interface configuration
command set.
13
flow-control Enables interface flow control. Flow
control regulates transmissions to
match the bandwidth of the receiving
port.
13
frame-type <all|tagged> Choose to accept both tagged and
untagged incoming frames or just
tagged incoming frames on a port.
13
gvrp Enables this function to permit VLAN
groups beyond the local switch.
13
help Displays a description of the interface
commands.
13
igmp-filtering
profile <name>
Sets the IGMP filtering profile for this
port.
13
igmp-group-
limited
Limits the number of multicast groups. 13
igmp-group-
limited number
<number>
Sets the number of multicast groups this
port is allowed to join.
13
igmp-immediate-
leave
Enables IGMP immediate leave on the
port.
13
igmp-querier-
mode
<auto|fixed|edge
>
Sets the IGMP querier mode of a port.
auto uses the port as an IGMP query
port after it receives IGMP query
packets.
fixed always uses the port
as an IGMP query port.
edge stops the
switch from using the port as an IGMP
query port.
13
inactive Disables the specified interface on the
switch
13
ingress-check Enables the device to discard incoming
frames for VLANs that are not included
in a port member set.
13
intrusion-lock Enables intrusion lock on a port and a
port cannot be connected again after
you disconnected the cable.
13
mirror Enables port mirroring in the interface. 13
dir
<ingress|egress
|both>
Enables port mirroring for incoming,
outgoing or both incoming and outgoing
traffic.
Port mirroring copies traffic from one or
all ports to another or all ports for
external analysis.
13
multicast-limit Enables the interface multicast limit. 13
<pkt/s> Sets how many multicast packets the
interface receives per second.
13
Table 85 Command Summary: Interface (continued)
COMMAND DESCRIPTION PRIVILEGE