Filter
Top Products
Chapter 33 Command Examples
GS-3012/GS-3012F User’s Guide
242
Figure 131 show interface Command Example
33.2.6 show mac address-table
Syntax:
show mac address-table <all <sort>|static>
This command displays the MAC address(es) stored in the switch. The following example
shows a static MAC address table.
sysname# show interface 2
Port Info Port NO. :2
Link :100M/F
Statuss :FORWARDING
LACP :Disabled
TxPkts :69
RxPkts :4
Errors :0
Tx KBs/s :1.684
Rx KBs/s :1.684
Up Time :0:02:12
TX Packet Tx Packets :69
Multicast :0
Broadcast :0
Pause :0
Tagged :0
RX Packet Rx Packets :4
Multicast :0
Broadcast :4
Pause :0
Control :0
TX Collison Single :0
Multiple :0
Excessive :0
Late :0
Error Packet RX CRC :0
Length :0
Runt :0
Distribution 64 :4
65 to 127 :74
128 to 255 :18
256 to 511 :0
512 to 1023 :0
1024 to 1518 :44
Giant :0
sysname#
where
<sort>
= Specifies the sorting criteria (MAC, VID or port).