Filter
Top Products
Chapter 3 Hardware Overview
GS-3012/GS-3012F User’s Guide
49
3.4 Configuring the Switch
You may use the embedded web configurator or command line interface to configure the
switch. If you’re using the web configurator, you need Internet Explorer 5.5 and later or
Netscape Navigator 6 and later.
You can access the command line interface using a terminal emulation program on a computer
connected to the switch console port (see Section 3.1.1 on page 44) or access the switch using
Telnet.
The next part of this guide discusses configuring the switch using the web configurator.
1000
(GS-
3012F)
Green Blinking The system is transmitting/receiving to/from an Ethernet network.
On The link to a 1000 Mbps Ethernet network is up.
Off The link to a 1000 Mbps Ethernet network is down.
100 (GS-
3012F)
Amber Blinking The system is transmitting/receiving to/from an Ethernet network.
On The link to a 100 Mbps Ethernet network is up.
Off The link to a 100 Mbps Ethernet network is down.
MGMT
10 Green Blinking The system is transmitting/receiving to/from an Ethernet device.
On The port is connected at 10Mbps.
Off The port is not connected at 10Mbps or to an Ethernet device.
100 Amber Blinking The system is transmitting/receiving to/from an Ethernet device.
On The port is connected at 100Mbps.
Off The port is not connected at 100Mbps or to an Ethernet device.
Table 2 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION