Filter
Top Products
Chapter 12 Maintenance
WAP3205 User’s Guide
110
Note: Do not turn off the WAP3205 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
WAP3205 again.
The WAP3205 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 79 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.
12.7 Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the WAP3205’s current configuration to a file on
your computer. Once your WAP3205 is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WAP3205.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 80 Maintenance > Backup/Restore