Filter
Top Products
Chapter 7 Connection Wizard
WAP3205 User’s Guide
54
The following table describes the labels in this screen.
Wireless Security: WPA-PSK/WPA2-PSK
Choose WPA-PSK or WPA2-PSK security in the Security mode field to set up a password for
your wireless network.
Figure 38 Wireless Security: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 23 Wireless Security: No Security
LABEL DESCRIPTION
Wireless
Network
Name (SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the WAP3205, make sure all wireless clients use the same
SSID in order to access the network.
Security mode Select a security level from the drop-down list box.
Choose None to have no wireless LAN security configured. If you do not enable any
wireless security on your WAP3205, your network is accessible to any wireless
networking device that is within range.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.
Table 24 Wireless Security: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Wireless
Network
Name (SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the WAP3205, make sure all wireless stations use the
same SSID in order to access the network.
Security mode Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key. Choose
this option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.
Wireless
password
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens.