Filter
Top Products
Chapter 7 Connection Wizard
WAP3205 User’s Guide
55
Wireless Security: WEP
Choose WEP security in the Security mode field to configure a WEP key for your wireless network.
Figure 39 Wireless Security: WEP
The following table describes the labels in this screen.
Verify
Password
Retype the password to confirm.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.
Table 25 Wireless Security: WEP
LABEL DESCRIPTION
Wireless
Network
Name (SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the WAP3205, make sure all wireless stations use the
same SSID in order to access the network.
Security mode Choose WEP security to enable data encryption using WEP keys.
WEP
Encryption
Select 64-bits or 128-bits.
This dictates the length of the security key that the network is going to use.
Authentication
Method
Select Open or Shared Key from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP key to login
to the wireless client.
Select Shared Key to force the clients to provide the WEP key prior to
communication. Otherwise, select
Open.
Default Key You can configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
Select a default WEP key to use for data encryption.
Table 24 Wireless Security: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION