Filter
Top Products
Chapter 4 Client Mode
WAP3205 User’s Guide
31
4.7 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Wireless LAN > Site Survey to open the following screen.
Figure 17 Client Mode: WLAN > Site Survey
The following table describes the labels in this screen.
Network Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security Mode Select WPA-PSK or WPA2-PSK to add strong security on this wireless network.
Encryption Type Select the type of wireless encryption employed by the access point to which you
want to connect.
Pre-Shared Key WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the pre-shared key employed by the access point to which you want to
connect.
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to go back to the previous screen.
Table 11 Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Table 12 Client Mode: WLAN > Site Survey
LABEL DESCRIPTION
Station Site Survey
# Select a wireless device and click Add Profile to open a configuration screen
where you can add the selected wireless device to a profile and then enable it.
SSID This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the
WAP3205 is connecting to it.
BSSID This displays the MAC address of the wireless device.