Filter
Top Products
Chapter 4 Client Mode
WAP3205 User’s Guide
25
Figure 11 Status: Client Mode
The following table describes the labels shown in the Status screen.
Table 6 Status Screen: Client Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the WAP3205’s model name.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 is set -
Client Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN Information
WLAN OP Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP3205’s
wireless LAN is set - Client Mode.
MAC Address This shows the wireless adapter MAC Address of your device.
Status This shows the current status of the Wireless LAN - ON.
Name (SSID) This shows a descriptive name used to identify the WAP3205 in the wireless LAN.
Connect Status This shows whether or not the WAP3205 has successfully associated with an access
point - Connected or Disassociated.
802.11 Mode This shows the wireless standard.