Filter
Top Products
Chapter 13 Troubleshooting
WAP3205 User’s Guide
119
1 Make sure the power LED is on.
2 Press the RESET button for longer than 1 second to restart/reboot the WAP3205.
3 Press the RESET button for longer than five seconds to set the WAP3205 back to its factory-default
configurations.
If the WAP3205 restarts automatically, wait for the WAP3205 to finish restarting, and log in to the
Web Configurator. The password is “1234”.
If the WAP3205 does not restart automatically, disconnect and reconnect the WAP3205’s power.
Then, follow the directions above again.
13.5 Wireless Router/AP Troubleshooting
I cannot access the WAP3205 or ping any computer from the WLAN (wireless AP or router).
1 Make sure the wireless adapter on the wireless station is working properly.
2 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports
the same wireless standard as the WAP3205.
3 Make sure your computer (with a wireless adapter installed) is within the transmission range of the
WAP3205.
4 Check that both the WAP3205 and your wireless station are using the same wireless and wireless
security settings.