Filter
Top Products
Chapter 10 Wireless LAN
WAP3205 User’s Guide
98
Figure 69 Network > Wireless LAN > Scheduling
The following table describes the labels in this screen.
10.12 WDS Screen
A Wireless Distribution System (WDS) is a wireless connection between two or more APs. Use this
screen to set the operating mode of your WAP3205 to AP + Bridge or Bridge and establish
wireless links with other APs. You need to know the MAC address of the peer device, which also
must be in bridge mode.
Table 39 Network > Wireless LAN > Scheduling
LABEL DESCRIPTION
Wireless LAN Scheduling
Enable Wireless
LAN Scheduling
Select this to enable Wireless LAN scheduling.
Scheduling
WLAN Status Select On or Off to specify whether the Wireless LAN is turned on or off. This
field works in conjunction with the Day and For the following times fields.
Day Select Everyday or the specific days to turn the Wireless LAN on or off. If you
select Everyday you can not select any specific days. This field works in
conjunction with the For the following times field.
For the following
times (24-Hour
Format)
Select a begin time using the first set of hour and minute (min) drop down
boxes and select an end time using the second set of hour and minute (min)
drop down boxes. If you have chosen On earlier for the WLAN Status the
Wireless LAN will turn on between the two times you enter in these fields. If you
have chosen Off earlier for the WLAN Status the Wireless LAN will turn off
between the two times you enter in these fields.
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to reload the previous configuration for this screen.