Filter
Top Products
Chapter 6 Introducing the Web Configurator
WAP3205 User’s Guide
47
6.3 Resetting the WAP3205
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the WAP3205 to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to “1234” and the IP address will be reset to “192.168.1.2”.
6.3.1 Procedure to Use the Reset Button
1 Make sure the power LED is on.
2 Press the RESET button for longer than 1 second to restart/reboot the WAP3205.
3 Press the RESET button for longer than five seconds to set the WAP3205 back to its factory-default
configurations.