Filter
Top Products
DUA1840-0AAA01
Accessing the Switch 1005 VT100 Interface
2-19
SETUP TRAPS
Select this button to display the setup screen for trap
parameters. Trap Setup is described in
“Setting Up Traps”
in Chapter 3.
Logging Off
If you have finished using the facility, select the Logoff option from the
bottom of the main menu. If you accessed the facility using a Telnet
session or modem connection, the connection will be closed
automatically.
Auto Logout
There is a built-in security timeout on the VT100 interface. If you do not
press any keys for three minutes, the management facility will warn
you that the inactivity timer is about to expire. If you do not press a key
within 10 seconds, the timer will expire and the screen will be locked;
any displayed statistics will continue to be updated. When you next
press a key, the display changes to the Auto Logout screen shown in
Figure 2-6
.
Figure 2-6
Auto Logout screen
The Auto Logout screen requests you to enter your password again. If
the password is correctly entered, the screen that was active when the
timer expired is displayed. If you make a mistake entering your
password, you will be returned to the Logon screen.