3Com 1005 Switch User Manual


 
DUA1840-0AAA01
3-6
C
H
A
P
T
E
R
3:
S
W
I
T
C
H
C
O
N
F
I
G
U
R
A
T
I
O
N
Ageing Time
This field allows you to specify the ageing time
(hours:minutes) for all non-permanent entries in the Switch Database
of the module You can set an ageing time in the range 0 minutes to
277 hours with a default of 30 minutes. If you enter 00:00, the database
entries are non-ageing; non-ageing entries do not age but will be
deleted from the database if the Switch 1005 is reset or a power-off/on
cycle occurs.
Fixed 10BaseT Port Capacity
This read-only field shows how many
non-removable Ethernet ports (10Mbps) are on this module.
Internal 100Mbps Ports
This read-only field shows how many internal
connections to the Fast Ethernet (100Mbps) backplane are available for
this module.
Internal 10Mbps Ports
This read-only field shows how many internal
connections to the Ethernet backplane (10Mbps) are available for this
module.
Transceiver Module
This read-only field shows the type of Transceiver
Module installed into the module, or states
Not Fitted.
Expansion Card
This read-only field shows the type of Expansion
Module fitted onto this module, or states
Not Fitted
.
Transceiver Module 1
,
Transceiver Module 2
,
Transceiver Module 3
These three read-only fields show the type of Transceiver Modules
installed into your Expansion Module (if fitted), or state
Not Fitted
.