Filter
Top Products
46 CHAPTER 4: CONFIGURING THE SWITCH FROM THE WEB INTERFACE
Setup
Use the Setup screen to create VLANs on the Switch. To
propagate information about VLAN groups used on this
Switch to external devices, you must specify a VLAN ID
for each VLAN.
Figure 31 Setup Screen
Available options on the Setup screen include:
■ VLAN ID – ID of configured VLAN (1-4094, no
leading zeroes)
For examples on setting up VLANs, refer to “Sample
VLAN Configurations”.
CAUTION: At least one port must always be an
untagged member of VLAN 1 (the management VLAN).
If you choose to connect all ports to VLANs other than
VLAN 1, you will no longer be able to access the Web
interface. If this happens, you will need to reset the
Switch to factory settings.
By default, all ports belong to VLAN 1 as untagged
members. However, they can belong to multiple VLANs
as tagged members. Also, newly created VLANs will
initially have no ports associated with them.
Modify VLAN
Use the Modify VLAN screen to change the VLAN to
which a port belongs, and configure the port to
communicate with all other VLANs, or a selected VLAN.
Figure 32 Modify VLAN Screen