3Com 2226-SFP Switch User Manual


 
ABOUT THIS GUIDE
This guide describes how to install your 3Com Switch
and perform initial management configurations. It
covers the following switches:
Baseline Switch 2226-SFP Plus (3CBLSF26)
Baseline Switch 2426-PWR Plus (3CBLSF26PWR)
Baseline Switch 2250-SFP Plus (3CBLSF50)
Unless noted otherwise, the features, specifications and
procedures described hereafter are shared by all the
switch models covered in this guide. Device drawings,
screen captures and command line interface examples
are based on the 3CBLSF26PWR model. Where features
vary significantly between the switches, examples are
provided for each.
This guide is intended for use by those responsible for
installing and setting up network equipment;
consequently, it assumes a basic working knowledge of
LANs (Local Area Networks).
Diese Anleitung ist für die Benutzung durch
Netzwerkadministratoren vorgesehen, die für die
Installation und Einstellung von Netzwerkkomponenten
verantwortlich sind; Erfahrung bei der Arbeit mit LANs
(Local Area Networks) ist vorausgesetzt.
If release notes are shipped with your product and the
information there differs from the information in this
guide, follow the instructions in the release notes.
Most user guides and release notes are available in
Adobe Acrobat Reader Portable Document Format (PDF)
or HTML on the 3Com World Wide Web site:
www.3Com.com
Conventions
Table 1 and Table 2 list conventions that are used
throughout this guide.
Table 1 Notice Icons
Icon Notice Type Description
Information note Information that describes
important features or instructions
Caution Information that alerts you to
potential loss of data or potential
damage to an application, system,
or device
Warning Information that alerts you to
potential personal injury