Filter
Top Products
2-4 CHAPTER 2: INSTALLING THE HUB
.
Figure 2-2 Attaching a Bracket for Rack Mounting
3 Insert the two screws and tighten with a screwdriver. Do not overtighten
the screws.
4 Repeat steps 2 and 3 for the other side of the hub.
5 Mount the hub in the rack and secure it with suitable screws, as shown in
Figure 2-3.
Figure 2-3 Rack Mounting the Hub
6 Remove the protective rubber cap from each downlink port and attach
the proper cable to make the desired network connection. Table 2-1
provides connector and cable information for downlink connections.
For guidelines on making typical connections, see Chapter 3.
®
®
1000BASE-SX
1
TX RX
2
TX RX
3
TX RX
4
TX RX
5
TX RX
6
TX RX
7
TX RX
8
TX RX
1
% BW USAGE
234 5678 9
PAUSERPS FAILPWR
UNIT
STATUS
RPS ONOVERTEMP
LINK
ACTIVITY
PORT STATUS
SUPER
STACK
SuperStack II
HUB 1000 SX
100
10
50
3C510-SX