Filter
Top Products
Updating the Firmware Image A-15
**** Port Configuration Menu ****
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
(5) Show port settings
(6) Use factory default settings
(7) Save new port settings
(8) Exit without change to settings
(9) Apply changes and exit
Selected ports: 1, 2, 3, 4, 5, 6, 7, 8, 9
Enter choice -> 9
Changes applied
If you want settings to persist after a hub reset, enter option 7 before
entering option 9.
Updating the
Firmware Image
On rare occasions you may need to update the hub’s firmware image to
install a bug fix or a standards update. Firmware updates are made
available on the 3Com World Wide Web site:
http://www.3com.com/
Checking the
Firmware Version
To verify that the firmware version on the 3Com World Wide Web site
is more recent than the version installed on the hub, display the hub
status. At the Hub 1000 SX Configuration menu prompt, enter:
2
***************************************************
** Hub 1000 Configuration Menu **
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
Enter choice -> 2
The firmware version is listed near the bottom of the Hub Status screen.
For example:
Firmware version: 1.00, 02/05/98