Filter
Top Products
Configuring Port Settings A-7
Disabling Ports The following example shows how to disable ports 3, 5, 6, and 7 and
apply the changes.
***************************************************
** Hub 1000 Configuration Menu **
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
Enter choice -> 1
Enter port number(s), from 1 to 9: 3 5-7
**** Port Configuration Menu ****
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
Table A-2 Port Configuration Menu
Option Description
(1) Enable port Enable the port for linking. The factory
default is all ports enabled.
(2) Disable port Disable the port for linking.
(3) Enable auto-negotiation Enable auto-negotiation. The factory
default is auto-negotiation enabled on
all ports.
(4) Disable auto-negotiation (force link) Disable auto-negotiation.
(5) Show port settings List the current settings for all ports.
(6) Use factory default settings Return selected ports to factory
default settings.
(7) Save new port settings Save the settings. Select this option if you
want settings to persist after a hub reset.
(8) Exit without change to settings Exit to the Hub 1000 SX Configuration
menu without applying or saving settings.
(9) Apply changes and exit Apply the settings and exit to the
Hub 1000 SX Configuration menu.
If you want settings to persist after a hub
reset, you must select option 7 before
selecting option 9.