Filter
Top Products
A-4 APPENDIX A: USING THE CONSOLE PORT
Hardware Version 0
Bootcode Version 1.00, 02/05/98
Firmware Version 1.00, 02/05/98
****************************************************
* *
* SuperStack II (tm) *
* Hub 1000 SX *
* Copyright (c)1997 3Com Corporation *
* *
****************************************************
Enter password ->
Any POST FAIL message indicates a fatal hardware error. If you see a FAIL
message, return the hub to the supplier.
Logging On The default password that is set at the factory is admin. If this is the first
time that anyone has logged on to the hub, enter the default password at
the prompt:
admin
Asterisks (*) instead of plain text appear at the prompt while you are
typing the password.
The Hub 1000 SX Configuration menu appears.
***************************************************
** Hub 1000 Configuration Menu **
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
Enter choice ->
To select an option from the Configuration menu, enter the option
number at the prompt.
After 4 minutes of inactivity, the CLI logs off automatically.