Filter
Top Products
Configuring Port Settings A-9
***************************************************
** Hub 1000 Configuration Menu **
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
Enter choice -> 1
Enter port number(s), from 1 to 9: 1
**** Port Configuration Menu ****
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
(5) Show port settings
(6) Use factory default settings
(7) Save new port settings
(8) Exit without change to settings
(9) Apply changes and exit
Selected ports: 1
Enter choice -> 4
Enable Outgoing Flowcontrol (Y/N)? y
Port 1 is a downlink. Because downlinks support outgoing flow control only,
you can enable or disable outgoing flow control, but you cannot configure
incoming flow control. You might choose to disable outgoing flow control
if the port is linking to a device that does not support flow control.
**** Port Configuration Menu ****
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
(5) Show port settings
(6) Use factory default settings
(7) Save new port settings
(8) Exit without change to settings
(9) Apply changes and exit
Selected ports: 1
Enter choice -> 7
Settings saved