Filter
Top Products
A-14 APPENDIX A: USING THE CONSOLE PORT
Restoring the
Factory Default
Settings
To restore port settings to factory defaults:
1 At the Configuration menu prompt, enter:
1
2 Enter the numbers of the ports to be restored to factory defaults.
3 At the Port Configuration menu prompt, enter:
6
4 Apply the changes.
For example:
***************************************************
** Hub 1000 Configuration Menu **
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
Enter choice -> 1
Enter port number(s), from 1 to 9: 1-9
**** Port Configuration Menu ****
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
(5) Show port settings
(6) Use factory default settings
(7) Save new port settings
(8) Exit without change to settings
(9) Apply changes and exit
Selected ports: 1, 2, 3, 4, 5, 6, 7, 8, 9
Enter choice -> 6
Ports set to factory defaults