Filter
Top Products
A-6 APPENDIX A: USING THE CONSOLE PORT
To display the Port Configuration menu:
1 At the Configuration menu prompt, enter:
1
2 At the next prompt, enter the numbers of the ports that you want
to configure.
You can specify a single port number, multiple port numbers separated by
commas or spaces (for example: 5, 6 7), or a range of port numbers
separated with a hyphen (for example: 5-7).
The following example specifies ports 3, 5, 6, and 7:
***************************************************
** Hub 1000 Configuration Menu **
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
Enter choice -> 1
Enter port number(s), from 1 to 9: 3 5-7
The Port Configuration menu appears, and the specified ports are
displayed. For example:
**** Port Configuration Menu ****
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
(5) Show port settings
(6) Use factory default settings
(7) Save new port settings
(8) Exit without change to settings
(9) Apply changes and exit
Selected ports: 3, 5, 6, 7
Enter choice ->
Table A-2 summarizes the Port Configuration menu options.