Filter
Top Products
USING MODEM STATION
85
The two lines below the connection settings are
the advanced commands currently in use.
Below them is a display of the contents of the
‘S-Registers’ for your modem. These registers
are special programmable areas of your
modem’s memory. They are used to store
commands that are too complex to be handled
by the standard (or ‘AT’) commands.
Just below that you will see the last number
dialed. You can also see this information by
typing ATI4 in a Terminal program and
pressing ENTER.
The next option displays the “Stored Profile”
screen. This screen shows the configuration
stored in your modem’s NVRAM (special
programmable memory). Note that any stored
phone numbers are displayed on this screen as
well. This is the equivalent of the ATI5
command. The information displayed is in the
same format as the “Active Profile” screen with
the addition of stored phone numbers.
The next two screens contain information that
our technical support representatives may need
if you request support.
Click Configuration to bring up the first of
these screens.