3Com 3C905C-TX-M Network Card User Manual


 
GLOSSARY
107
Electronic Industries Association (EIA)
Group which defines electronic standards in the U.S.
error control
Various techniques that check the reliability of characters
(parity) or blocks of data. V.42 and MNP error-control
protocols use error detection (CRC) and retransmission of
flawed frames (ARQ).
facsimile
A method for transmitting the image on a page from one
point to another. Commonly referred to as fax.
fax mode
The mode used by a modem to send and receive data in
facsimile format. See definitions for V.17, V.27ter, V.29.
flow control
A mechanism that compensates for differences in the flow
of data into and out of a modem or other device. See
commands &Hn, &In, &Rn.
frame
A data communications term for a block of data with
header and trailer information attached. The added
information usually includes a frame number, block size
data, error-check codes, and Start/End indicators.
full duplex
Signals can flow in both directions at the same time over
one line. In microcomputer communications, may refer to
the suppression of the online local echo.
half duplex
Signals can flow in both directions, but only one way at a
time. In microcomputer communications, may refer to
activation of the online local echo, which causes the
modem to send a copy of the transmitted data to the
screen of the sending computer.