Filter
Top Products
MODEM INSTALLATION WITH WINDOWS 95
30
3. Once Windows 95 has installed the
modem’s drivers, you will see the following
screen. This screen tells you which
communications port your modem is
installed to. (NOTE: Your screen may
show a different COM port.) Make a note
of the COM port setting. You will need this
information later when you installing the
software on the CD-ROM. Remove the
CD from your CD-ROM drive and click
OK. Windows will restart.
4. Once Windows restarts, you should verify
that the modem installation was a success.
When your desktop returns, click the
Windows Start button and point to
Settings. Then click Control Panel.