Filter
Top Products
56 8E6 TECHNOLOGIES, ENTERPRISE REPORTER 3.0 USER’S GUIDE
ADMINISTRATOR SECTION: CHAPTER 2 - CONFIGURING THE ER 3.0 SERVER
When the Server is running again, these files are FTPed to
the Server.
• Shut Down the Server’s Hardware - The Shutdown
Hardware option should only be selected if the Server’s
hardware must be completely shut down—for example, if
the Server box will be physically relocated. When this
option is selected, the Server box shuts off, and files
normally FTPed to the Server will be routed to a problem
directory in the logging device. When the Server is
rebooted, these files will be FTPed to the Server.
• Restart the Server’s Software - The Restart Software
option should be selected if daemons fail to run and/or the
database needs to be started again. When this option is
selected, the MySQL database is rebooted.
• Shut Down the Server’s Software - The Shutdown
Software option should be selected if a patch needs to be
installed on the Server. When the Shutdown Software
option is selected, the MySQL database shuts off and no
files are FTPed to the Server.
Perform a Server Action
1. Click the radio button corresponding to the Server Action
you wish to execute.
2. Click the Apply button to display the warning screen.
3. To proceed with your selection, click the Restart or Shut-
down button on the warning screen. To change your
selection, click the Back button of the browser window to
return to the Shut Down screen.
NOTE: When the Restart Software or Hardware option is
selected, the Server will take five to 10 minutes to reboot. After
this time, you can go to another screen or log off.