Filter
Top Products
ADMINISTRATOR SECTION CHAPTER 1: ACCESSING THE SERVER
12 8E6 TECHNOLOGIES, ENTERPRISE REPORTER ADMINISTRATOR USER GUIDE
Chapter 1: Accessing the Server
Preliminary Network Settings
To initially set up your ER Server, follow the instructions in
the ER Quick Start Guide booklet packaged with your ER
unit. This guide explains how to perform the initial configura-
tion of the Server so that it can be accessed via an IP
address on your network.
NOTE: If you do not have the ER Administrator Quick Start
Guide, contact 8e6 Technologies immediately to have a copy
sent to you.
WARNING: In order to prevent data from being lost or corrupted
while the Server is running, the Server should be connected to a
UPS or other battery backup system.
Procedures for Accessing the Server
WARNING: Once you turn on the Server, DO NOT interrupt the
initial boot-up process. This process may take from five to 10
minutes per drive. If the process is interrupted, damage to key
files may occur.
When the Server is fully booted, any workstation on the
network that can access the Server’s IP address (set up
during Quick Start procedures) will be able to communicate
with the Server via the Internet.
1. Launch Internet Explorer (IE).
2. In the address line of the IE browser window, type in the
Server’s IP address appended by the following port
number:
• “:88” for an HTTP address
• “:8843” for an HTTPS address