Filter
Top Products
ADMINISTRATOR SECTION CHAPTER 2: CONFIGURING THE ER SERVER
34 8E6 TECHNOLOGIES, ENTERPRISE REPORTER ADMINISTRATOR USER GUIDE
1. Enter or edit an IP address in each appropriate field:
• In the Server 1 field, enter the IP address of the
primary NTP server to be used for clock settings on
your Server.
• In the Server 2 field, enter the IP address of the
secondary NTP server. The time from this server will
be used by your Server if the IP address for the
primary server fails to be accessed by your Server.
• In the Server 3 field, enter the IP address of the tertiary
NTP server. The time from this server will be used by
your Server if the IP addresses for the primary and
secondary servers fail to be accessed by your Server.
2. Click the Save button to save your entries.
NOTE: When you click the Save button, the IP addresses you
entered are saved, but the time on your Server will not be
synchronized with the NTP servers until you click the NTP
Update button.
Update the Time on the Server
After you have saved the IP addresses of NTP servers you
wish your Server to access, click the NTP Update button to
synchronize the clock on your Server with the NTP server
clocks.