Filter
Top Products
ADMINISTRATOR SECTION CHAPTER 2: CONFIGURING THE ER SERVER
8E6 TECHNOLOGIES, ENTERPRISE REPORTER ADMINISTRATOR USER GUIDE 33
Specify the Time Zone
1. At the Region pull-down menu, select your country from
the available choices.
2. At the Location pull-down menu, select the time zone for
the specified region.
3. Click Save to apply your settings, and to restart the Web
Client Server.
WARNING: The time zone set for the ER should be the same one
set for each Web access logging device to be used by the ER.
These “like” settings ensure consistency when tracking the
logging times of all users on the network.
Specify the Language Set
1. If necessary, select a language set from the Language
pull-down menu to specify that you wish to display that
text in the console.
2. Click Save to apply your settings, and to restart the Web
Client Server.
Specify Network Time Protocol Servers
IP addresses of servers running Network Time Protocol
(NTP) software are entered in the Server fields, and the
Current ER server system time (day, date, HH:MM:SS time
format, and year) displays below. NTP is a time synchroni-
zation system for computer clocks throughout the Internet.
Your ER Server will use the actual time from clocks at the IP
addresses you’ve specified.
For the Enter local network time protocol (NTP) server
fields, by default, the following IP addresses display in these
three fields: 128.59.35.142, 142.3.100.15, and
129.132.98.11. If you wish to use different NTP servers,
follow these steps: