Filter
Top Products
167
Alternatively, if you have a workstation with the Microsoft Windows
operating system, you can insert the CD into that system and create the
diskettes on that system.
Running the SSU
When the SSU starts in the default local execution mode, it accepts
input from the keyboard or mouse. The SSU presents a VGA-based GUI
(graphical user interface) on the primary monitor.
If you run the SSU from a read-only media, such as a CD-ROM, you
cannot save user preference settings (such as screen colors).
The SSU supports ROM-DOS version 6.22. The SSU will not operate
from a "DOS box" running under an operating system such as
Windows.
To start the SSU
1 Start the SSU using one of the following methods:
• From diskettes
Insert the first SSU diskette in floppy drive. Boot the server from
the diskette. You are prompted to insert the second diskette.
After loading completes the SSU starts automatically.
• From the Management CD
Boot the server to the Management CD and start the SSU from the
Utilities menu.
• From the service partition
Boot the server to the service partition (page 34) and execute the
following DOS commands:
C:\> cd ssu
C:\SSU> ssu.bat
2 The mouse driver loads if it is available; press Enter to continue.
3 When the SSU title appears on the screen, press Enter to continue.
BB!H:11!vh!.!FO/cppl!!Qbhf!278!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN