![](http://pdfasset.owneriq.net/4/7d/47dc253e-b39c-4d21-beaa-f4e8d6b95b96/47dc253e-b39c-4d21-beaa-f4e8d6b95b96-bg5d.png)
77
2 Remove the hard drive from its wrapper and place it on an
antistatic surface.
3 Record the new drive model and serial number in your equipment
log.
For a sample equipment log sheet, refer to page 195.
4 Place the drive in the carrier with the component side down.
5 Using the four screws removed earlier, attach the drive to the
carrier.
Label Description Label Description
A Air Baffle C Plastic rail
B Screw D Plastic rail
Figure 39 - Installing a SCSI hard disk drive in a carrier
BB!H:11!vh!.!FO/cppl!!Qbhf!88!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN