Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7132
1U Rackmount System
Installing the Chassis Rails
Position the fixed chassis rail sections you just removed along the side of the chassis making sure
the five screw holes line up. Note that these two rails are left/right specific. Screw the rail securely to the
side of the chassis (see Figure 2-2). Repeat this procedure for the other rail on the other side of the
chassis. You will also need to attach the rail brackets when installing into a telco rack.
Locking Tabs: As you have seen, both chassis rails have a locking tab, which serves two functions. The
first is to lock the server into place when installed and pushed fully into the rack, which is its normal posi-
tion. Secondly, these tabs also lock the server in place when fully extended from the rack. This prevents
the server from coming completely out of the rack when you pull it out for servicing.
Installing the Rack Rails
Determine where you want to place the server in the rack (see Rack and Server Precautions in Section 2-
3). Position the fixed rack rail/sliding rail guide assemblies at the desired location in the rack, keeping the
sliding rail guide facing the inside of the rack. Screw the assembly securely to the rack using the brackets
provided. Attach the other assembly to the other side of the rack, making sure that both are at the exact
same height and with the rail guides facing inward.