Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7132
1U Rackmount System
Intel Turbo Boost Configuration
Turbo Ratio Limit Program
Select Enabled to set the processor's clock ratio in relation to the bus speed. The options are Enabled
and Disabled. The default value depends on the type of CPU installed. (For example, the values shown
below indicate that an Intel® Core™ i7 processor 965 Extreme Edition is installed.)
1 - Core Ratio Limit
This increases (multiplies) the processor's core 1 clock speed in relation to the bus speed. The
default setting is 26. Press "+" or "-" on your keyboard to change this value.
2 ~ 3 - Core Ratio Limit
This increases the processor's core 2~3 clock speeds in relation to the bus speed. The default setting
is 25. Press "+" or "-" on your keyboard to change this value.
TDC Limit Override
This option will override the system's default electrical current setting for the processor. The options
are Enabled and Disabled.
TDC Limit Value
This option sets the processor's electrical current value. The default setting is
880. Press "+" or "-" on your keyboard to change this value.
TDP Limit Override
Select Enabled to override the default power setting for the processor. The op- tions are Enabled and
Disabled.
TDP Limit Value
Use this option to set the processor's power value. The default setting is 1040.
Press "+" or "-" on your keyboard to change this value.
C1E Support
Select Enabled to use the "Enhanced Halt State" feature. C1E significantly reduces the CPU's power
consumption by reducing the CPU's clock cycle and voltage during a "Halt State." The options are
Disabled and Enabled.