Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7132
1U Rackmount System
SMBus to PCI Slots
Jumpers JI2C1 and JI2C2 allow you to connect the
System Management Bus (I2C) to the PCI slot. The
default set- ting is Open (Disabled.) Both jumpers must
be set to the same setting (JI2C1 controls the clock
and JI2C2 controls the data). See the table on the right
for jumper settings.
BMC Enable/Disable
The JBMC1 jumper allows the user to enable or
disable the BMC (Base- board Management Control)
chip and the onboard IPMI connections. This jumper
is to be used together with the IPMI settings in the
BIOS. If this jumper is set to enabled, please also
enable IPMI in the BIOS and vice versa. The default
position is on pins 1 and 2 to enable BMC. See the
table on the right for jumper settings.
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside the VGA port) have
two LEDs. On each port, one LED indicates activity
while the other LED may be green, amber or off to
indicate the speed of the connection. See the table on
the right for the indication associated with the connec-
tion speed LED.