ADC CRA-C Network Card User Manual


 
Install the Megabit Modem CRA-C
Megabit Modem CRA-C User Manual 13
Table 4.
ADSL Pin Assignments for RJ-45 Connector
Pin Signal
1 Not Used
2 Not Used
3 Not Used
4 ADSL (Ring)
5 ADSL (Tip)
6 Not Used
7 Not Used
8 Not Used
Connect to the Data Network
The 10BASE-T MDI-X port connects the Megabit Modem CRA-C to the data
network. If the data network has an MDI-X port, use the yellow cross-over
Category 3 or better cable. If the data network has an MDI port, use the black
straight-through Category 3 or better cable.
Table 5 and Figure 5 show the 10BASE-T Ethernet interface data signals for
both MDI and MDI-X configurations.
Table 5.
10BASE-T Interface Control Signals
MDI Pin MDI-X Pin Signal Description
1 3 TD+ Transmit Data (+)
2 6 TD- Transmit Data (-)
3 1 RD+ Receive Data (+)
44- -
55- -
6 2 RD- Receive Data (-)
77- -
88- -