Filter
Top Products
25
Using the viewer window
The viewer window gives you the ability to view and control the AdderLink IP
and its host computer(s). Its operation is almost identical regardless of whether
you used the VNC viewer or your Web browser to display it.
The menu bar
The viewer window presents a menu bar similar to that shown below. Certain
items within the toolbar are displayed depending upon your access permissions
and/or the AdderLink IP conguration.
Re-sync mouse
Ensures that the
mouse pointer
which you move
and the mouse
pointer on the
host system
are correctly
synchronised.
Auto calibrate
Determines the
optimum video and
mouse settings for the
currently selected host
computer. This button
will ash red when
a new host screen is
encountered. Click this
button when you rst
visit a new screen.
Controls
Displays a menu of
options concerning
keyboard, video and
mouse operation.
Access mode
Allows you
to choose
between
Shared and
Private access
modes.
Dialogue area
Indicates your username
and the host system that
you are currently viewing.
This area can also display
other messages.
Congure
This option is only
available to the
admin user and
provides access
to the main
conguration
menus.
Viewer options
(VNC viewer only)
Click the VNC
icon to view the
viewer window
options
Power
Click to access the
power on/off options
for the current host
computer.
Hosts
Click to display
a list of hosts.
Choose an
entry to
connect to
that host
computer.
When using the viewer window
What is the best screen resolution to use?
The best resolution for your computer is one that is larger than the screen of
the host computer that you are viewing. This will allow you to see everything
without scrolling around, as described next.
How do I navigate around a larger screen?
If the screen that you are viewing has a larger resolution than your viewing
window you will need to scroll around to see all items. The viewer window
allows you to ‘bump scroll’. This means that when your mouse cursor bumps
against the edge of the screen, the screen image will scroll across automatically.
How do I escape from full screen mode?
Press the F8 button. This button is changeable but is most often set to F8.
Why is the button ashing red?
This happens when a new host screen is viewed (that has not been viewed
before). Click the button to perform an auto calibration for the screen and
the mouse. See Auto calibrate for important information about this feature.
How do I change between host computers?
The best way to change between host computers is to click the ‘Hosts’ button
and then select the required computer by name. See Host selection.
How do I remove traces of moved items from the screen?
When you move an item or window across the screen, sometimes it can leave
unsightly trails. These are called artifacts and can be particularly prevalent when
the connection speed is low. To remove artifacts, click the ‘Controls’ button and
select the ‘Refresh screen’ option. See Controls.
How do I make the most of a slow connection?
The VNC viewer is slightly better suited to slower connections than the browser
viewer because it offers more options. Click the Options button of the VNC
viewer when entering the AdderLink IP address during log on.
Minimise the Threshold setting
Ensure that the video Threshold setting is set higher than the automatic setting
suggests. Tweak this setting manually to ensure the best setting.
Fewer colours
Select the Low (64 colours) mode. The Very low option offers hardly any
improvement and looks a lot worse.
Rate limit mouse events
When selected, this mode greatly reduces the mouse movement data that are
sent to the host computer. When you move the local mouse, the remote cursor
will catch up roughly once per second.