Filter
Top Products
MX2800 M13 Multiplexer User Manual Configuration, Section 3
61200290L1-1G 3-19
Figure 3-13. Dialup Options Menu
Primary and Secondary Phone Numbers
When the MX2800 dials out to send a trap, it first dials the Primary Phone Number. If the call is unsuccess-
ful, it tries the Secondary Phone Number. Attempts between the two numbers continue until a call is estab-
lished and the trap is reported (or until each number’s maximum for redial attempts is reached). Refer to
Maximum Redial Attempts on page 3-19.
Initializing String
The AT command entered in this field is used to initialize the modem. Normally, this field should be left at
the default setting (ATZ).
Dial String
The AT command entered in this field causes the modem to dial out. Normally, this field should be left at
the default setting (ATDT).
Maximum Redial Attempts
The MX2800 attempts to establish a call the number of times entered in this field. If a successful call is not
established after the final attempt, the MX2800 discards the trap messages.
Idle Timeout
After establishing a call and sending trap messages, the MX2800 remains online for the amount of seconds
entered in this field. If the field is set to 0, the unit hangs up as soon as the trap is sent.