Filter
Top Products
64200600L1#T-31A © 2002, ADTRAN, Inc. Page 23
Total Access 600R User Interface Guide (UIG)
SYSTEM CONFIG
Set up the Total Access 600R operational configuration from the S
YSTEM
C
ONFIG
menu. Figure 4 shows the items
included in this menu.
Figure 4. System Config Menu
SYSTEM CONFIG>OPERATING MODE
For the T1 TDM application, the mode will be displayed as Channel Bank.
SYSTEM CONFIG>T1 TIMING MODE
The
T1 T
IMING
M
ODE
choices are
N
ETWORK
and
I
NTERNAL
.
Select
N
ETWORK
if the TELCO is providing clocking on the
T1 line. Select
I
NTERNAL
if there is no timing on the T1 circuit and the 600R will have to provide the clock. Default is
N
ETWORK
.
SYSTEM CONFIG>TELNET ACCESS
Sets Telnet access to
O
N
or
O
FF
. The factory default value for this parameter is
O
N
.
SYSTEM CONFIG>TELNET USER LIST
SYSTEM CONFIG>TELNET USER LIST>NAME
Up to four users can be configured for access to the 600R. Each user can be assigned a security level and time out.
The name is a text string of the user name for this session. You can enter up to 15 characters in this field. The factory
default is no entry in the
N
AME
field
.