Filter
Top Products
Page 28 © 2002, ADTRAN, Inc. 64200600L1#T-31A
Total Access 600R User Interface Guide (UIG)
SYSTEM CONFIG>NETWORK TIME>ADJUST FOR DAYLIGHT SAVING
Since some areas of the world use Daylight Savings Time, the Total Access 600R is designed to adjust the time on the
first Sunday in April and the last Sunday in October accordingly if this option is turned on. The choices are
Y
ES
and
NO
.
The factory default is
YES
.
SYSTEM CONFIG>NETWORK TIME>HOST ADDRESS
This is the IP address of the time server that the Total Access 600R will request and receive time from. The factory
default is no entry in the host address field.
SYSTEM CONFIG>NETWORK TIME>REFRESH
This is the interval of time between each request the Total Access 600R sends out to the time server. A smaller refresh
time guarantees that the unit receives the correct time from the server and corrects possible errors more quickly. This
may be more taxing on the machine. A range of refresh times is available for the user to decide which is best for their
unit. The choices are
5
MINS
, 10
MINS
, 15
MINS
, 20
MINS
, 25
MINS
, 30
MINS
, 35
MINS
, 40
MINS
, 45
MINS
, 50
MINS
, 55
MINS
,
and
60 MINS.
The factory default is
60 MINS
.
SYSTEM CONFIG>NETWORK TIME>STATUS
This displays the current status of the time negotiation process. If an error is displayed, check all connections and con-
figurations to try to resolve the problem.
SYSTEM UTILITY
Use the
SYSTEM UTILITY
menu to view and set the system parameters shown in Figure 5.
Figure 5. System Utility Menu