Filter
Top Products
64200600L1#T-31A © 2002, ADTRAN, Inc. Page 29
Total Access 600R User Interface Guide (UIG)
SYSTEM UTILITY>UPGRADE FIRMWARE
SYSTEM UTILITY>UPGRADE FIRMWARE>TRANSFER METHOD
Updates firmware when Total Access 600R enhancements are released. Two transfer methods are available for use in
updating the Total Access 600R.
The two methods for upgrading are
XMODEM
and
TFTP
.
TFTP
requires a TFTP server running on the network. The
Total Access 600R starts a TFTP client function which gets the upgrade code from the TFTP server. Selecting
XMO-
DEM
will load the upgrade code through the
CRAFT
port using any PC terminal emulator with xmodem capability.
The factory default is
TFTP.
SYSTEM UTILITY>UPGRADE FIRMWARE>TFTP SERVER ADDRESS
This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is configured) of the
TFTP server. The factory default is no entry in the
TFTP S
ERVER
A
DDRESS
field
.
SYSTEM UTILITY>UPGRADE FIRMWARE>TFTP SERVER FILENAME
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the upgrade code.
The factory default is no entry in the
TFTP S
ERVER
F
ILENAME
field.
SYSTEM UTILITY>UPGRADE FIRMWARE>TRANSFER STATUS
This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success message will
be displayed here.
SYSTEM UTILITY>UPGRADE FIRMWARE>START TRANSFER
This activator is used when the configurable items in this menu are complete.
SYSTEM UTILITY>UPGRADE FIRMWARE>ABORT TRANSFER
Use this activator to cancel any TFTP transfer in progress.
SYSTEM UTILITY>CONFIG TRANSFER
SYSTEM UTILITY>CONFIG TRANSFER>TRANSFER METHOD
Sends a file containing the Total Access 600R configuration to a PC connected to the
CRAFT
port using XMODEM
protocol or to a file on a TFTP server using the TFTP protocol.
C
ONFIG
T
RANSFER
also lets you save the Total Access 600R configuration as a backup file, so you can use the same
configuration with multiple Total Access 600R units. In addition,
C
ONFIG
T
RANSFER
can retrieve a configuration file
from a TFTP server.
Before using
S
TART
T
RANSFER
, the Total Access 600R should have a valid IP address, subnet mask,
and default gateway (if required).